2.3.8: Provide Commercial Vehicle Border Screening

This process shall be responsible for checking a commercial vehicle and its cargo through a border crossing point. The checks carried out by the process shall comprise a comparison of the trip identity and other border clearance assessments already provided by the commercial vehicle administration processes, and held in a local data store. This process shall also receive the results of any inspections performed by the border inspection system once the vehicle has been cleared to pass through the border agencies' area. A check shall also be made by the process to see if the lock tag attached to the vehicle's cargo has been changed. If either of these checks produce negative results then the process shall request the vehicle to pull-in, otherwise the vehicle shall be allowed to pass. The process shall send its decision to the process that provides the roadside inspectors' interface, to enable an override to be applied if required. The decision of the process (with the override if it is applied) shall be sent to the message output process and is written back to the vehicle's on-board tag.

This process is associated with the Commercial Vehicle Check Equipment physical object.

This process is associated with the following functional objects:

This process is associated with the following data flows: